Ean 13 Settings - Psion Teklogix 7530 User Manual

Variations
When using Code 128, you can choose the variation or type of bar code variation the
scanner will recognize. The options available are
These options are described below.
Standard
Enable (set to 'ON') "Standard" if Code 128 is desired.
UCC 128
"UCC" is a variation of Code 128.
EAN/UCC 128
To successfully scan this type of bar code, "EAN/UCC" must be enabled (set to
'ON'). "EAN/UCC" bar codes include group separators and start codes.
Field Size/Chars
Refer to the description beginning on page 123 for details.
5.7.2.3

EAN 13 Settings

Include Country
If this parameter is enabled (set to 'ON'), the country code is included with the
decoded bar code data.
Include Check
If this parameter is enabled (set to 'ON'), the check digit is included with the
decoded bar code data.
Addendum
Important: Before "Addendum" can take effect, the "Short Code" parameter
in the Options menu (see page 120) must be enabled (set to 'ON').
An addendum is a separate bar code, supplementary to the main bar code.
This parameter provides three options:
Depending on the value chosen for this parameter, an addendum is recognized
or ignored.
Standard
Disabled, Optional
Psion Teklogix 7530 Hand-Held Computer User Manual
Chapter 5: Configuration

EAN 13 Settings

, and
UCC EAN/UCC
and
Required
.
.
125