Psion Teklogix 7530 User Manual page 249

Chapter 6: Tekterm Application
Emulation
3274/Telnet
Fujitsu Host
If this parameter is set to 'Y', data is sent in Fujitsu format. Enabling 'Fujitsu Host'
causes the standard IBM formatting codes (for start of field, setting buffers, etc.) to
be replaced by the codes used by Fujitsu host computers.
Intl EBCDIC
If this parameter is enabled (set to 'Y'), the 'international' EBCDIC character set is
used, swapping the positions of the ! and ] characters.
Nulls in Fields
Setting this parameter to 'Y' allows 'null' characters – e.g., hyphens (-) or periods
(.) – to fill in empty entry fields.
IP for SysReq
When the system request key is pressed, a Telnet "Interrupt Process" command is
generated. The "Interrupt Process" command is sent to the host in place of the
standard mechanism used to send the system request key press to a host using
Telnet.
230
Psion Teklogix 7530 Hand-Held Computer User Manual
Emulation
Emulation
05
Fujitsu Host
Intl EBCDIC
Nulls in Fields
IP for SysReq
BRK for Attn
LU Name Enabled
LU Name
Features
FKEY0-7
FKEY8-15
FKEY16-23
FKEY24-31
FKEY32-39
Range
N Y/N
N Y/N
N Y/N
N Y/N
N Y/N
N Y/N
see text
» see text
» see text
» see text
» see text
» see text
» see text