Psion Teklogix 7530 User Manual page 219

Chapter 6: Tekterm Application
Screen
# of Cols
This parameter defines the logical page width (in characters) used by the host
computer application. Emulator systems trim the host application screens to this
width. This page width cannot be smaller than the width of the display. Display
panning is used if the page is wider than the display.
Note: The value in this parameter must be an even number.
Default font
This parameter determines the default font that appears when the 7535 memory is
reset.
• Use the <RIGHT> or <LEFT> arrow key to scroll through the available
options.
80-col. font & 132-col. font
These parameters are used to set the font size on the screen if the default font is not
acceptable. An escape sequence must be sent from the host before a hand-held can
switch to either
• Use the <RIGHT> or <LEFT> arrow keys to scroll through the size options
for these parameters.
Video
06 Video
Bold
Blink
Reverse
Underline
The possible attributes for these parameters are: "BLNK" (blink), "ULIN"
(underline), "REV" (reverse), and "NONE" (normal).
Bold
This parameter specifies the actual video attributes to be assigned to fields created
with the "Bold" ANSI attribute.
200
Psion Teklogix 7530 Hand-Held Computer User Manual
. or
80-col font 132-col
NONE
BLNK
REV
ULIN
. .
font
Range
see text
see text
see text
see text