Table of Contents
Advertisement
6.9.3 Saving Changes To Parameters
Whenever a parameter value is altered, the new value must be saved. To do this:
•
Press <F4> – the "SAVE" key.
If you are using a touchscreen:
•
Tap the stylus on the "SAVE" softkey label.
•
If the softkey labels are not visible, you'll have to press <F4> – the "SAVE"
function key.
If a parameter value is changed and the menu exited before the change is saved, a
dialogue box appears asking whether or not the operator wants to save the changes.
6.9.4 Retrieving Default Parameter Values
Important:
When <F3> – the DEFAULT key – is pressed, all parameter
values revert to the factory defaults, including those values that
you've changed and saved.
•
Press <F3> – the "DEFAULT" function key, or tap the stylus on the
"DEFAULT" softkey label – to reinstate the default parameter values.
•
Press <F4> – the "SAVE" function key, or tap the stylus on the "SAVE"
softkey label – to save the changes.
•
Reset the 7535. See "Resetting The 7535 Hand-Held Computer" in the next
section.
6.10 Resetting The 7530 Hand-Held Computer
Some parameter adjustments require that the 7530 be reset before the changes can
take effect. To reset the 7530:
•
Press and hold down the <BLUE> key and the <ENTER/ON> key simulta-
neously for a minimum of six seconds.
A reset results in a complete reboot of the unit. All RAM memory contents are lost.
The contents of the flash memory and memory card are preserved. When the 7530 is
reset, the screen displays the Psion Teklogix and Microsoft® Windows® CE.net
splash screen before displaying the startup desktop.
Chapter 6: Tekterm Application
Saving Changes To Parameters
Psion Teklogix 7530 Hand-Held Computer User Manual
175
Advertisement
Table of Contents
Troubleshooting
