Ean 8 - Psion Teklogix 7530 User Manual

Chapter 5: Configuration

EAN 8

When "Addendum" is set to
addendum. If this parameter is set to
an addendum and if one exists, appends it to the main bar code. When the
parameter is set to
without an addendum.
Prefix/Suffix
Prefix Char
This character, if non-zero, is added before a successfully decoded bar code. Press
the key you want to insert in the dialogue box attached to this parameter. The
ASCII/Unicode key value of the keypress is displayed.
Pressing the <ESC> key in this dialogue box resets the data to zero.
Suffix Char
This character, if non-zero, is added after a successfully decoded bar code. Press the
key you want to insert in the dialogue box attached to this parameter. The
ASCII/Unicode key value of the keypress is displayed.
Pressing the <ESC> key in this dialogue box resets the data to zero.
Strip Leading
This parameter determines the number of characters that will be removed from the
beginning of the bar code before the prefix character is added.
Note: The appended character is treated as any other keyboard character. For
example, if <BKSP> is pressed, the usual action for that key is per-
formed. If your 7530 is operating with the Psion Teklogix ANSI emulation
application, the hand-held transmits the escape sequence associated with
the function immediately after the bar code data.
Strip Trailing
The value entered in this parameter determines the number of characters that will be
removed from the end of the bar code before the suffix character is added.
5.7.2.4
Include Check
If this parameter is enabled (set to "Y"), the check digit is included with the decoded
bar code data.
126
Psion Teklogix 7530 Hand-Held Computer User Manual
Disabled,
the scanner does not accept the main bar code
Required,

EAN 8

the scanner does not recognize an
the scanner searches for
Optional,