Tess Settings - Psion Teklogix 7535 User Manual

Chapter 6: Tekterm Application

TESS Settings

6.17.2 TESS Settings

Each session you create has its own "Settings" parameters. Additional TESS
information is documented in "TESS Emulation" on page 120.
Auto Term#
Note: Refer to "Group" on page 176 for additional instructions.
When this parameter is set to "Y", a unique unit number is assigned for the current
TESS session. If "Auto Term#" is set to "Y", any value assigned to the "Terminal #"
parameter is ignored.
Note: "Auto Term#" is available when
Conn" parameter (page 177) or when
Menu (see "802.IQ v1" on page 143).
Group
When "Auto Term#" is set to "Y", the 'Group' parameter is used to identify the
group or pool of numbers from which an auto-address is chosen.
Terminal #
For every application session you create, the "Terminal #" assigned must be non-
zero and unique. This parameter defines the terminal number for the TESS session
and uniquely identifies all transmissions to and from the 7535.
176
Teklogix 7535 Hand-Held Computer User Manual
TESS
04
Auto Term # N»
Terminal # 1
Host Conn »
Screen »
Characters »
Tests »
Features »
Scanner »
Fields »
Anchor View N»
Auto Term#
Group
Range
see text
see text
see text
see text
see text
see text
see text
see text
see text
is assigned to the "Host
802.IQv2
is enabled in the Radio
802.IQv1
Range
1 1-5