Psion Teklogix 7530 User Manual page 251

Chapter 6: Tekterm Application
Emulation
FKEY0-7, FKEY8-15, FKEY16-23, FKEY24-31 And FKEY32-39
The sub-menus attached to these parameters allow you to map the 7530 function
keys.
5250/Telnet Emulation
05
WEC
Remap Underline to
Intl EBCDIC
Nulls in Fields
Term Type
Virtual Dev Enable
Virtual Dev Prefix
Features
FKEY0-7
FKEY8-15
FKEY16-23
FKEY24-31
FKEY32-39
WEC (Write Error Code)
This parameter determines the type of WEC used. If set to "advisory", a TESS
advisory message is generated when the host sends a WEC command to the 7530.
Otherwise, if set to "screen text", the 7530 locks the keyboard and displays the error
message contained in the WEC command on the screen at the line specified by the
host. In this case, the 7530 must be unlocked manually using the function key
mapped to RESET.
232
Psion Teklogix 7530 Hand-Held Computer User Manual
06
FKEY0-7
FKEY0
FKEY1
FKEY2
FKEY3
FKEY4
FKEY5
FKEY6
FKEY7
Emulation
ENTER
F1
F2
F3
F4
F5
F6
F7
Advisory
None
N
Y
IBM-5251-11
N
»
»
»
»
»
»
Range
see text
see text
Y/N
Y/N
see text
Y/N
see text
see text
see text
see text
see text
see text
see text