Features - Psion Teklogix 7530 User Manual

6.18.2.5 Features

Features

05
Printer
Binary print
Queuing
Lcl Process
Send Mile
Next X
Kbd Locked
Remap Passthru
Disable Beep
Serial
Printer
This parameter enables and disables the pins in the serial port used for printers or
other external devices.
Binary print
When this parameter is enabled (set to "Y"), the page displayed on the 7530
computer is spooled as is, except for trailing white-space removal. When disabled
(set to "N"), each line of the page displayed on the hand-held is preceded by a
linefeed (LF) and followed by a carriage return (CR).
Queuing
This parameter enables and disables queuing mode (see "Queuing Mode" on
page 162). It also enables TESS procedures to be loaded into the 7530. This
parameter should be enabled if local procedures and the ability to switch between
hosts within a TESS session are required. Changes to this parameter take effect only
after the 7530 is reset.
Lcl Process – Save on Reset
The menu item "Local Process" has a sub-menu attached to it – "Save on Reset".
When this parameter is enabled (set to "Y"), data stored in the 7530 is saved if the
unit is reset. Local procedures are defined on page 161.
Chapter 6: Tekterm Application
Range
Y Y/N
N Y/N
Y Y/N
Y » see text
N Y/N
N Y/N
N Y/N
N Y/N
N Y/N
» see text
Psion Teklogix 7530 Hand-Held Computer User Manual
Features
219