Table of Contents
Advertisement
6.15.4 Security
04
Security
Default mode
User
Sup. password
Allow Teklogix
6.15.4.1 Default Mode
The value assigned to this parameter determines the operator's level of access to
7530 parameters. The allowable values are User, Supervisor and Teklogix. "Default
mode" is set to User.
At User level, the operator is restricted to a small group of parameters. These are
listed in the "User" sub-menu. Refer to "User Level Options" on page 185 for
details. Choosing Supervisor allows access to all the parameters available in the
7530.
The Teklogix level password is only available to Psion Teklogix personnel.
•
Press the <LEFT> or <RIGHT> arrow key to select the appropriate security
level – User, Supervisor or Teklogix.
6.15.4.2 User Level Options
05
Screen switch
View Mode
Font Chg
Important:
Only Supervisor and Teklogix level passwords can change the
values of the User options.
Screen Switch
When set to "Y", the operator can use the "Split screen" parameter to toggle
between screens when multiple applications are running on the 7535. Refer to "Split
Screen" on page 188 for details about using this function.
User
Supervisor, Teklogix
»
see text
######
see text
Y
Y/N
User
Y
Y
Y
Psion Teklogix 7530 Hand-Held Computer User Manual
Chapter 6: Tekterm Application
Range
Range
Y/N
Y/N
Y/N
Security
185
Advertisement
Table of Contents
Troubleshooting
