Moving Between Split Screens; Toggling Between Full & Split Screens; Using The Asterisk As A Wild Card - Psion Teklogix 7530 User Manual

Chapter 6: Tekterm Application

Moving Between Split Screens

6.17.1.2 Moving Between Split Screens

To move the cursor from one pane in a split screen to the next:
• Press <CTRL> <RIGHT> or <LEFT>. The cursor moves in order from the
left-most pane to the right and from the top-most pane to the bottom.
6.17.1.3 Toggling Between Full & Split Screens
To toggle between a split and full screen format:
• Press <CTRL> <DOWN> arrow.
The application displayed when toggling from a split to a full screen format is
determined by the cursor location in the split screen. For example, if the cursor
is in the pane of a split screen in which the TESS application is displayed and
<CTRL> <DOWN> is pressed to display a full screen, the TESS application will be
displayed in the full screen.

6.17.1.4 Using The Asterisk As A Wild Card

When a screen is split, the application displayed in each pane is fixed in the "View
IDs" parameter. Using an asterisk * in the "View IDs" parameter indicates that a
particular pane in the split screen is not fixed to any particular application and can be
changed as required.
For example, suppose you want to split the screen into two vertical segments with
the left pane containing the "Parameters" menu and the right pane containing no
fixed application. The "Type" and "View IDs" parameters would be completed as
follows:
To change the application displayed in the pane with no fixed application:
• If the cursor is not currently in the pane, press <CTRL> <RIGHT> or
<LEFT> arrow to move the cursor into the appropriate screen.
• Press <CTRL> <ALT><0> to display the startup "Display Menu".
• Type the letter corresponding to the new application you want to display.
190
Psion Teklogix 7530 Hand-Held Computer User Manual
04 Split screen
Type 2 Way |||
View IDs A*