Entering Numeric And Text Data - YOKOGAWA ZR22G User Manual

6.3 Touchpanel Switch Operations
6.3.1 Basic Panel and Switch
The converter uses a touchpanel switch which can be operated by just touching the panel
display. Figure 6.4 shows the Basic panel display. The switches that appear in the switch display
area vary depending on the panel display, allowing all switch operations. Table 6.1 shows the
switch functions.
Tag name display area
Primary value
Secondary value
Tertiary value
Figure 6.4
Tag name display area: Displays the set tag name (Refer to Section 10.3.2, Entering Tag Name).
Primary to tertiary value display items: Displays the selected item. (Refer to Section 7.9, Setting
Switch display area:
Alarm and error display area:
Table 6.1
Home key:
Returns to the Execution/Setup display.
Reject key:
Moves back to the previous display.
Cursor key:
Moves the cursor down.
Graph display key:
Displays a trend graph.
Alarm:
Displayed if an alarm arises.
6.3.2 Display Configuration
Figure 6.5 shows the configuration. A password the displays positioned below enables display
"Execution/Setup" to be protected. If a password has not been set, press the [Enter] key to
proceed to the next panel display. The [Home] key enables you to return to "Execution/Setup
display" from any panel display.
Tag:
21.0
17.43mA -Output1
17.43mA -Output2
Basic Panel Display
Displays switches and functions selected according to the panel display.
Displays an error if an alarm or error occurs. If you touch this
area, the details of the error or alarm are then displayed.
Switches and Their Functions
<6. Components>
% O
2
Display Item.)
Enter key:
Enters the input value and sets up the
selected item.
Enter
Setup key:
Used to enter the Execution/Setup display.
Detailed-data key:
Displays the analog input value.
Cursor:
Points the cursor at the currently
selected item.
Error:
Displayed if an error occurs.
Switch display area
Alarm and error
display area
F7.3E.ai
T7-1E.ai
IM 11M12A01-02E 16th Edition : Mar. 19, 2020-00
6-4