Front door
Figure 5.1
5.1.2
Wiring
Connect the following wiring to the converter. It requires a maximum of seven wiring connections
as shown below.
(1) Detector output (connects the converter with the detector.)
(2) Detector heater power (connects the converter with the detector.)
(3) Analog output signal
(4) Power and ground
(5) Contact output
(6) Operation of the solenoid valve of automatic calibration unit
(7) Contact input
(8) Temperature input
Terminals for external wiring in the converter
<5. Wiring>
Terminals are visible
when the terminal cover is removed.
Cable inlet
IM 11M12A01-02E
5-3
F5-2E.ai
16th Edition : Mar. 19, 2020-00