Blow Back; Mode; Operation Of Blow Back - YOKOGAWA ZR22G User Manual

Preset upper limit
Preset lower limit
Figure 10.5
10.2.3 Setting Upper and Lower Limit Values on Graph
Set upper- and lower-limit values on the graph in the following procedure:
Press "Upper limit" in the Trend graph display. The numeric-data entry key appears.
Enter the upper-limit value. Also enter the lower-limit value in the same way. The allowable
settings for both upper-limit and lower-limit values range from 0 to 100 vol%O
for humidity, 0 to 1 kg/kg for mixing ratio.)
10.2.4 Default Setting
When the analyzer is delivered, or if data are initialized, the set data are by default, as shown in
Table 10.3.
Table 10.3
Item Default
Parameter
Sampling interval
Upper limit (oxygen concentration)
Lower limit (oxygen concentration)
Upper limit (humidity)
Lower limit (humidity)
Upper limit (mixing ratio)
Lower limit (mixing ratio)
NOTE
If a rapid change in the measured value occurs during sampling, no sampled data are plotted on
the graph. Use the graph indication tentatively. Check the output current for accurate data.
25.0 vol%O
2
0.0 vol%O
2
Sampling period
Plotting Graph for Sampling Interval
Default Values for Graph Setting
Oxygen concentration
30 seconds
25 vol%O
0 vol%O
25 % H
2
0 % H O
2
0.2 kg/kg
0 kg/kg
<10. Other Functions>
10 min./div
12.3 vol%O
60 data
Value
2
2
O
Time per division,
calculated by the set
sampling interval
Currently measured
2
value
F10.5E.ai
(0 to 100 %H
2
IM 11M12A01-02E 16th Edition : Mar. 19, 2020-00
10-6
O
2