Laser And Led Safety Guidelines And Warnings; General Laser Safety Guidelines - Juniper EX9214 Hardware Manual

EX9214 Switch Hardware Guide
Related
Documentation

Laser and LED Safety Guidelines and Warnings

General Laser Safety Guidelines

318
deverá evitar a exposição à radiação e não deverá olhar fixamente para
orifícios que se encontrarem a descoberto.
¡Atención! Debido a que la apertura del puerto puede emitir radiación invisible
cuando no existe un cable de fibra conectado, evite mirar directamente a las
aperturas para no exponerse a la radiación.
Varning! Osynlig strålning kan avges från en portöppning utan ansluten
fiberkabel och du bör därför undvika att bli utsatt för strålning genom att inte
stirra in i oskyddade öppningar.
General Safety Guidelines and Warnings on page 299
Laser and LED Safety Guidelines and Warnings on page 318
Installation Instructions Warning on page 307
Grounded Equipment Warning on page 314
Juniper Networks devices are equipped with laser transmitters, which are considered a
Class 1 Laser Product by the U.S. Food and Drug Administration and are evaluated as a
Class 1 Laser Product per EN 60825-1 requirements.
Observe the following guidelines and warnings:
General Laser Safety Guidelines on page 318
Class 1 Laser Product Warning on page 319
Class 1 LED Product Warning on page 319
Laser Beam Warning on page 319
When working around ports that support optical transceivers, observe the following
safety guidelines to prevent eye injury:
Do not look into unterminated ports or at fibers that connect to unknown sources.
Do not examine unterminated optical ports with optical instruments.
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laser
radiation. The lens in the human eye focuses all the laser power on the
retina, so focusing the eye directly on a laser source—even a low-power
laser—could permanently damage the eye.
Copyright © 2017, Juniper Networks, Inc.