Juniper EX9214 Hardware Manual page 313

Copyright © 2017, Juniper Networks, Inc.
Table 64: Chassis Component Alarm Conditions on EX9200
Switches (continued)
Chassis
Component Alarm Condition
/var
partition usage is
high.
/var partition is full.
Rescue configuration is
not set.
Feature usage requires a
license or the license for
the feature usage has
expired.
Chapter 29: Alarms and System Log Messages
Alarm
Severity Remedy
Check the interface cable
connection.
Reboot the system.
If the alarm recurs, open a support
case using the Case Manager link
at
http://www.juniper.net/support/
or call 1-888-314-5822 (toll free,
US & Canada) or 1-408-745-9500
(from outside the United States).
Minor Clean up the system file storage
(yellow) space on the switch. For more
information, see Cleaning Up the
System File Storage Space.
Major Clean up the system file storage
(red) space on the switch. For more
information, see Cleaning Up the
System File Storage Space.
Minor Use the
request system configuration
(yellow) command to set the
rescue save
rescue configuration. For more
information, see Setting or Deleting
the Rescue Configuration (CLI
Procedure).
Minor Install the required license for the
(yellow) feature specified in the alarm. For
more information, see Understanding
Software Licenses for EX Series
Switches.
289