Juniper EX9214 Hardware Manual page 138

EX9214 Switch Hardware Guide
Table 51: SFP+ Direct Attach Copper Cable Specifications (continued)
Model Number Specification
EX-SFP-10GE-DAC-3M Rate
Connector type
Supply voltage
Power consumption (per end)
Storage temperature
Cable type
Wire AWG
Minimum cable bend radius
Cable characteristic impedance
Crosstalk between pairs
Time delay
Length
Support for Virtual Chassis
configuration
114
Value
10-Gbps full-duplex serial transmission
SFP+ passive Twinax cable assembly
3.3 V
0.57 W
–40° F (–40° C) through 185° F (85° C)
Twinax
30 AWG
1 in. (2.54 cm)
100 ohms
2% maximum
1.31 nsec/ft
9.9 ft (3 m)
Yes
Copyright © 2017, Juniper Networks, Inc.