Juniper EX9214 Hardware Manual page 174

EX9214 Switch Hardware Guide
Table 61: Parts and Tools Required for Connecting an EX Series Switch to Earth
Ground (continued)
Earthing
Terminal
Switch Location
EX8208 Left side of
the chassis
EX8216 Two
earthing
terminals:
Left side
of the
chassis
Rear
panel of
the
chassis
EX9204 Rear panel
of the
chassis
EX9208 Rear panel
of the
chassis
EX9214 Rear panel
of the
chassis
150
Grounding Cable Grounding Lug
Requirements Specifications
6 AWG (13.3 Panduit
mm²), minimum LCD2-14A-Q or
60°C wire, or as equivalent
permitted by the —provided
local code
2 AWG (33.6 Panduit
mm²), minimum LCD2-14A-Q or
60°C wire, or as equivalent
permitted by the —provided
local code
One 6 AWG (13.3 Thomas&Betts
mm²), minimum LCN6-14 or
60°C wire, or one equivalent—
that complies with provided
the local code
One 6 AWG (13.3 Thomas&Betts
mm²), minimum LCN6-14 or
60°C wire, or one equivalent—
that complies with provided
the local code
One 6 AWG (13.3 Thomas&Betts
mm²), minimum LCN6-14 or
60°C wire, or one equivalent—
that complies with provided
the local code
Screws and
Washers Screwdriver
Two ¼-20 x 0.5 in. Phillips (+)
screws with #¼" number 2
split-washer
—provided
Two #¼" flat
washers—
provided
Two ¼-20 x 0.5 in. Phillips (+)
screws with #¼" number 2
split-washer
—provided
Two #¼" flat
washers—
provided
Two ¼-20 x 0.5 in. Phillips (+)
screws with #¼" number 2
split-washer—
provided
Two #¼" flat
washers—
provided
Two ¼-20 x 0.5 in. Phillips (+)
screws with #¼" number 2
split-washer—
provided
Two #¼" flat
washers—
provided
Two ¼-20 x 0.5 in. Phillips (+)
screws with #¼" number 2
split-washer—
provided
Two #¼" flat
washers—
provided
Copyright © 2017, Juniper Networks, Inc.
Additional
Information
See "Special
Instructions
to Follow
Before
Connecting
Earth Ground
to a Switch"
on page 151.
See
"Grounding
Cable and
Lug
Specifications
for EX9200
Switches" on
page 100.
See
"Grounding
Cable and
Lug
Specifications
for EX9200
Switches" on
page 100.
See
"Grounding
Cable and
Lug
Specifications
for EX9200
Switches" on
page 100.