Juniper EX9214 Hardware Manual page 35

Table 6: CLI Equivalents of Terms Used in Documentation for EX9214 Switches (continued)
Hardware
Item (CLI) Description (CLI)
Routing One of the following:
Engine (n)
RE–S–EX9200
–1800X4
RE–S–EX9200
–2X00x6
CB (n) One of the following:
EX9200–SCBE
EX9200–SF2
FPC (n) Abbreviated name of
the line card.
One of the following:
EX9200-2C-8XS
EX9200 4x40G
QSFP
EX9200
24x10GE+6x40GE
EX9200-MPC
EX9200-12QS
EX9200 32x10G SFP
40x 1GE RJ45
EX9200-40x1G-SFP
EX9200-40FE
EX9200-40XS
Copyright © 2017, Juniper Networks, Inc.
Value (CLI)
n is a value in the range 0-1.
In a base configuration, only
one entry appears.
In a redundant configuration,
two entries appear–one for
each Routing Engine module
(RE module) installed in the
chassis.
n is a value in the range of
0-2.
Multiple line items appear in
the CLI if more than one
Switch Fabric modules (SF
modules) are installed in the
chassis.
CB0, CB1, and CB2 stand for
SF modules.
n is a value in the range 0-11.
The value corresponds to
the line card slot number in
which the line card is
installed.
Chapter 1: Switch Overview
Item in
Documentation Additional Information
RE module "Routing Engine Module
in an EX9200 Switch" on
page 29
SF module "Switch Fabric Module in
an EX9200 Switch" on
page 33
Line card (The switch EX9200-2C-8XS Line
does not have actual Card on page 57
FPCs—the line cards are
EX9200-4QS Line
the FPC equivalents on
Card on page 59
the switch.)
EX9200-6QS Line
Card on page 60
EX9200-MPC Line
Card on page 62
EX9200-12QS Line
Card on page 66
EX9200-32XS Line
Card on page 68
EX9200-40T Line
Card on page 69
EX9200-40F Line
Card on page 71
EX9200-40F-M Line
Card on page 72
EX9200-40XS Line
Card on page 74
11