Juniper EX9214 Hardware Manual page 33

Table 5: EX9214 Switch Hardware Configurations (continued)
Switch Configuration
EX9214-REDUND3A-DC
EX9214-BASE3-AC
(base configuration with 4100 W AC
power supplies)
EX9214-REDUND3-DC
(redundant configuration with 4100 W
DC power supplies)
EX9214-REDUND3-AC
(redundant configuration with 4100 W
AC power supplies)
Copyright © 2017, Juniper Networks, Inc.
Configuration Components
Chassis with craft interface and midplane
Three EX9200-SF2 modules
Two EX9200-RE modules
Two fan trays
Four 4100 W DC power supplies
Blank panels for line card slots
Chassis with craft interface and midplane
Three 4100 W AC power supplies
Two EX9200-SF modules
One EX9200-RE module
Two fan trays
One air filter kit
12 cover panels for empty line card slots
Cover panels for empty power supply slots
Chassis with craft interface and midplane
Three EX9200-SF modules
Two EX9200-RE modules
Two fan trays
One air filter kit
Four 4100 W DC power supplies
12 cover panels for empty line card slots
Chassis with craft interface and midplane
Three EX9200-SF modules
Two EX9200-RE modules
Two fan trays
One air filter kit
Four 4100 W AC power supplies
12 cover panels for empty line card slots
NOTE: You can install up to 12 line cards (in any combination) in the switch.
NOTE: Line cards are not part of the base or redundant configuration. You
must order them separately.
NOTE: Power cords and additional power supplies (AC or DC) must be
purchased separately.
Chapter 1: Switch Overview
First Junos OS
Release
14.1
12.3R2
12.3R2
12.3R2
9