While On An Active Call; Putting A Call On Hold; Using The Mute Feature - Nortel IP Phone 2002 User Manual

While on an active call

This section describes features available during an active call.

Putting a call on hold

Use the Hold feature when talking on one line and another call arrives on a
second line. Retain the original call by putting it on hold and then answer
the second call.

Using the Mute feature

This procedure shows you how to mute a call.
3 A red light appears next to the Mute key, meaning your speaker phone is turned
Copyright © 2006, Nortel Networks
.
To place a call on hold, press the Hold key. The LCD
indicator flashes beside the line on hold.
To retrieve a call on hold, press the line (DN) key beside
the flashing LCD indicator.
1.
2.
on, but the microphone is off and the caller cannot hear you.
Carrier VoIP
Nortel IP Phone 2002 User Guide
NN10300-007 06.04 Standard
(I)SN09U 20 October 2006
A red light next to the green, circular Handsfree
button means that your speaker phone is turned
on.
Press the Mute key located under your volume
control bar.
53
Nortel Networks Confidential