Table of Contents
Advertisement
BASIC OPERATIONS
Frequency Adjusting
When the transceiver is in VFO frequency mode or is in FM radio frequency mode, rotate the channel knob
to adjust the frequency, or you can input the frequency by the keypad.
Enter the desired frequency by increments.
1.
Rotate the channel knob clockwise to increase the frequency, rotate it counterclockwise to decrease the
frequency. The frequency amount changed depends on the chosen frequency step. It will add or reduce
the frequency by the chosen step value.
NOTE: Channel step increments:2.5K, 5K, 6.25K, 10K, 12.5K, 20K, 25K, 30K and 50KHz. The FM radio
step increment is 50K. AM/SW/LW radio step frequency is 10K.
Enter the desired frequency by keypad.
2.
VFO mode: if you want input frequency145.150MHz, please press [1], [4], [5], [1], [5], [0] on the keypad.
FM mode: if you want input frequency 101.50MHz, please press [1], [0], [1], [5] on the keypad.
NOTE: The frequency input of the main channel or FM radio is relevant to the channel step and frequency
range. If the frequency entered is beyond range - the frequency entered will not be accepted. In FM mode,
the keypad input frequency channel step is 100K.
Receiving
When your transceiver receives a transmission, the LED light will light up (it will light green if the main band
16
Advertisement
Table of Contents
