Table of Contents
Advertisement
ADVANCED FUNCTION OPERATIONS
Cloning Cable
This feature will copy the programmed data and parameters
from the master unit to slave units. It copies the parameters
and memory program settings.
Connection: Use optional CP04 cloning cable, connect
Read/write frequency port on both master and slave,
setting and programing as the requirement below.
[Settings: Master side]
Press the [PF1] side key to Power on, the display shows "CLONE", the master unit enters into copy
1.
mode .
Press [PF1] key, the display appears "CLONE XX" XX stands for the data amount
2.
being cloned.
3.
When the data transfer is completed, slave unit restarts, the master unit displays
"CLONE 04".
Master unit will remain in the cloning mode to prepare for the next cloning session,
4.
if you reboot the master radio - it will exit the cloning mode and return back to the
normal mode.
87
Advertisement
Table of Contents
