5.1
Power on the radio
Turn on the radio by turning the [Power/Volume] switch clockwise till a click
is heard, and the LCD displays will show a start-up message, and you will
hear a beep after 7seconds.
5.2
Adjust Volume
Rotate the [Power/Volume] knob to adjust the volume. Turn clockwise to
increase the volume and counterclockwise to decrease the volume. The
LCD display will show the volume status during an adjustment.
5.3
Main band/Sub band switch
Press the
if there is 2 channels shown on the display. The channel with bold
characters is the main channel.
5.4
VFO/Channel switch
Press the
key to switch between VFO and channel display.
If the Channel is set to display a Channel name, this function is
invalid.
5.5
Set up VFO frequency
Turn the radio to VFO mode, press the
main band, the VFO frequency can only be set up when the channel is the
main "bold text" channel.
Operation 1:
Input the VFO frequency directly by the keyboard.
Operation 2:
steps.
AT-D87 8UV Digital DMR and Analog
5. BASIC OPERATIONS
key to switch the main channel to the other channel
Turn the channel selector to adjust the VFO frequency
UHF/VHF Two Way Radio
key to switch the channel to
13