Table of Contents
Advertisement
ADVANCED FUNCTION OPERATIONS
button and then press PF2 button
a.) Press
or PF2 button to choose CTCSS, DCS or OFF, when DCS signaling is selected, press
b.) Press
button to choose DCS positive or inverse code
c.) Rotate channel switch to select 123.0HZ,when CTCSS display 88.5HZ(default )
exit menu
d.) Press
8. Store Memory Channel 99
a.) Press
button and then press
b.) Rotate channel switch to select Channel 99
c.) Press
button and then press and hold
to MR mode and check Channel 99 (enter 0/9/9 to select Channel 99)
d.) Press
9. The split is now programmed.
Optional Signaling (DTMF)
Users can enable or disable the "Optional Signaling" in each channel by programming software. DTMF
tones are similar to CTCSS/DCS tones and can be used in conjunction with them. You can set the squelch
level to require DTMF and/or CTCSS/DCS. DTMF tones can also allow for Selective Calling, Group Calling,
All Call, PTT ID, Remotely Stun, Remote Kill and Remote Waking.
PTT ID (ANI): If you set your current channel to transmit your PTT ID, the transceiver will send its
1.
transmitting ID by pressing or releasing the PTT key according to how you set it up.
If you decide to assign radios to groups with DTMF tones - You can set a group call "wildcard" for
2.
each group by programming software. (DTMF character A, B, C, D, "*" or "#").
button
button
79
Advertisement
Table of Contents
