BATTERY INFORMATION
▲
Do not recharge the battery if it is already fully charged. This could shorten the life of the battery or damage
the battery.
▲
Do not charge the battery or transceiver if it is damp or wet. Dry it before charging to avoid any danger.
WARNING:When keys, ornamental chains, or other metals contact or short the battery terminals, the
battery could cause a shock or injury. If the battery terminals are allowed to short circuit, they will generate
a lot of heat. Be careful when you bring or use a spare battery. Put the battery or radio into an insulated
container. Do not put them into metal containers.
How to Charge
Plug the AC adapter into the AC outlet(100V-240V), then
1.
plug the cable of AC adapter into the DC jack, the indicator
will light GREEN--- this means it is waiting to charge.
2.
Slide the battery or transceiver with battery into the charger;
make sure the battery terminals are in contact with the
charging terminals well. The LED may begin lashing---
pre-charging begins.
3.
It may pre-charge for about 5 minutes, In which once the
LED stops lashing and turns into a solid RED--- the full
charging has begun.
4.
It may take about 5-6 hours to fully charge the battery,
when the LED turns GREEN— it is fully charged.
06
AC Input