Programming A Duplex Channel Example - AnyTone THE OBLITERATOR OBLTR-8R User Manual

ADVANCED FUNCTION OPERATIONS

Programming a Duplex Channel Example

This example is for: 146.700MHz 600kHz minus offset into channel 99 CTCSS tone 123.0 (optional).
1. Set radio to VFO Mode (Frequency Mode)
button switch VFO/MR
a.) Press
2. Select Display A (select the Upper Display)
a.) Press button and select the Upper Display.
3. Disable TDR (Dual Watch/Dual RX) which toggles between A and B
a.) press button switch between A and B
4. Enter RX frequency
a.) Enter 1/4/6/7/0/0 or enter 1/4/6/7/#
5. Set 600kHz offset
a.) Press button and then press
b.) Press /
c.) Rotate channel switch to set 600kHz offset
exit Menu
d.) Press
6. Offset Frequency Direction Setup
a.) Press button and then press
b.) LCD display "-" icon. Minus offset is settled.
7. Set CTCSS or DCS codes for Transmit. (if needed) ( example = CTCSS TX tone 123.0Hz )
78
button select Menu NO.13(OBLTR-8R)/NO.14(TERMN-8R) OFFSET
button
button