Table of Contents
Advertisement
FUNCTION MENU SETUP
Squelch mode setup
This function is used for setting squelch mode to prevent receiving unrelated singals.
key, the top left corner of LCD displays "
1. Press
key enter into function menu.
2. Press
/
item, it shows "SIGNAL" on LCD.
3. Rotate channel selector knob to choose desired squelch mode.
SQ: When current channel receives matching RF signals, transceiver can hear
the talking from the other party.
CT/DCS: When current channel receives matching RF signals and matching CTCSS/
DCS signaling, transceiver can hear the talking from the other party.
TONE: When current channel receives matching RF signals and matching optional
signaling, transceiver can hear the talking from the other party.
CT&TO: When current channel receives matching RF signals+matching optional
signaling + matching CTCSS/DCS signaling, transceiver can hear the
talking from the other party.
CT/TO: When current channel receives matching RF signals, or matching optional
signaling, or matching CTCSS/DCS signaling, transceiver can hear the talking from the other
party.
4. Press
key or
54
key to choose NO.08(OBLTR-8R)/NO.09(TERMN-8R) function
key to conirm and exit.
" icon, then press
Advertisement
Table of Contents
