Scanning Resume Time Setup - AnyTone THE OBLITERATOR OBLTR-8R User Manual

FUNCTION MENU SETUP
NOTE: Individual Squelch levels per channel can be set if you have a PF1/PF2 key programmed as Squelch off.
While the Squelch is off - turn the channel selector knob which will allow a Per-Channel Squelch change.
when the receiving signal strength hits a minimum strength clarity, otherwise, the
transceiver will remain muted.
key, the top left corner of LCD displays "
1. Press
enter into function menu.
2. Press /
on LCD.
3. Rotate channel selector knob to choose desired setup.
00~09: 10 levels of squelch in total for optional, "00" is minimum setup value (normally open).
4. Press
key or

Scanning Resume Time Setup

There are four kinds of scanning dwell time.
key, the top left corner of LCD displays "
1. Press
enter into function menu.
2. Press /
item, it shows "SCAN" on LCD.
3. Rotate channel selector knob to choose desired setup.
64
key to choose NO.25(OBLTR-8R)/NO.40(TERMN-8R) function item, it shows "SQL"
key to conirm and exit.
key to choose NO.26(OBLTR-8R)/NO.41(TERMN-8R) function
" icon, then press
" icon, then press
key
key