Basic Operations; Switch On / Off Transceiver; Battery Capacity Enquiry; Adjusting Volume - AnyTone AT-318P Instruction Manual

BASIC OPERATIONS

Switch on / off Transceiver

Switch on Transceiver: Under power-off state, turn [POWER / VOLUME] clockwise till hearing
"Click" to switch on the transceiver. The transceiver will announce "welcome to use" when power-
on and announce the current channel.
Switch off Transceiver: Under power-off state, turn [POWER / VOLUME] anticlockwise till hearing
"Click" to switch off the transceiver.

Battery Capacity Enquiry

Under the standby conditions, press the programmed key of "Battery Capacity Enquiry" [PF1],
transceiver announce current battery capacity. There are 10 grades in total. Grade 10th means full
battery capacity.
When the battery state is grade 1st (6.1V), the LED lights red. The transceiver will voice prompt
users each 30 seconds to charge timely and also enter automatically the state of no transmission.

Adjusting Volume

Under power-on state, turn POWER / VOLUME switch to adjust the volume. Turn clockwise to
increase the volume, and anticlockwise to decrease the volume. You can press PF2 key to monitor
the current volume.
NOTE: You can press the programmed key of squelch off [PF2] to monitor the background noise and
meanwhile turn POWER / VOLUME to adjust the volume. Under the communicating state, you can
adjust volume as per your need more accurately.
11
Professional
FM Transceiver