Vox Delay Setup; Automatic Power Off Time Setup - AnyTone THE OBLITERATOR OBLTR-8R User Manual

FUNCTION MENU SETUP(VERSION D)
1~10: Total 10 VOX levels for optional.
OFF: VOX function is disabled.
4. Press
key or

VOX Delay Setup

In order to prevent the transceiver from returning back to the receive mode during
a VOX initiated call, (which may cause some of the transmission to be missed) the
user can set a suitable delay time before the VOX transmission is ended.
key, the top left corner of LCD displays "
1. Press
enter into function menu.
key to choose NO.22(OBLTR-8R)/NO.37(TERMN-8R) function item, it shows "VDELAY"
2. Press /
on LCD.
3. Rotate channel selector knob to choose desired setup.
0.5S-3S: Total 27 levels for optional, each interval is 0.1S
4. Press
key or

Automatic Power Off Time setup

When this function is on, transceiver will automatic power off when reach the preset time.
key, the top left corner of LCD displays "
1. Press
2. Press /
on LCD.
62
key to conirm and exit.
key to conirm and exit.
key to choose NO.23(OBLTR-8R)/NO.38(TERMN-8R) function item, it shows "APO"
" icon, then press
" icon, then press
key
key enter into function menu.