Table of Contents
Advertisement
USER MODE SETUP:AMATEUR OR COMMERCIAL RADIO
The transceiver is a high performance amateur and professional radio with dual band, dual standby, dual
display and other advanced features. According to your speciic application, you can set the radio to operate
as an Amateur Transceiver or as a Professional (Commercial) Transceiver. There are 3 operating modes - and
you can pick the mode best suited for your needs at anytime.
1.
Modes of Operation:
A.
By programming software:
Setup)" menu, choose the "Display Mode" drop down menu.Frequency and
Name modes will display the channels by frequency or name accordingly
and still allow amateur usage and access. Channel mode will restrict access
to amateur options (such as VFO).
B.
By manual setup:
2.
Amateur Transceiver Mode:
and Name are considered as Amateur transceiver modes. Under these modes,
you can press the "
A.
Frequency + Channel mode:
it enters into Frequency+Channel mode. This mode allows editing settings
of channels and the shortcut operation can also be used. Once the radio
is turned off or switched to another channel, the temporary settings will be
erased and changed back to the initial settings.(As pic 1)
B.
Name Tag + Channel Mode:
it enters into Name Tag + Channel Mode. In this mode, it will display the
corresponding channel name (if you have give a Channel name in the
memory). If no name is given, it will display the frequency + channel number.
In the PC software's "General Setting (Function
Please refer to "Display Mode" in Page 75.
Unless your setting is Channel mode, Frequency
" key to switch between Channel mode and VFO.
When you set the operating mode as "FREQ",
When you set the operating mode as "NAME",
(Pic 1)
(Pic 2)
(Pic 3)
(Pic 4)
03
Advertisement
Table of Contents
