Single Band Mode (Vhf/Uhf) (Vfo) - AnyTone THE OBLITERATOR OBLTR-8R User Manual

FUNCTION MENU SETUP
key, the top left corner of LCD displays "
1. Press
key enter into function menu.
key to choose NO.16(OBLTR-8R)/NO.17(TERMN-8R) function
2. Press /
item, it shows "TX" on LCD.
3. Rotate channel selector knob to choose desired setup.
ON: TX OFF is enabled.
OFF: TX OFF is disabled.
4. Press
key or

Single Band Mode (VHF/UHF) (VFO)

When this function is on, inputting frequency or Scanning frequency under VFO is limited in current VFO
frequency band.
key, the top left corner of LCD displays "
1. Press
menu.
key to choose NO.17(OBLTR-8R)/NO.32(TERMN-8R) function
2. Press /
item, it shows "BAND" on LCD.
3. Rotate channel selector knob to choose desired setup.
ON: Band limit is enabled.
OFF: Band limit is disabled.
4. Press
key or
key to conirm and exit.
key to conirm and exit.
" icon, then press
" icon, then press key enter into function
59