Function Menu Setup(Obltr-8R) - AnyTone THE OBLITERATOR OBLTR-8R User Manual

FUNCTION MENU SETUP(OBLTR-8R)

OBLTR-8R
Menu 1-16 of this transceiver are channel operations. Channel operations will temporarily change the functions
of the current channel. When the power is off or the channel has been changed, the relevant setup will be
erased. Only under VFO mode, will the channel operations will be saved until your next change. Menu 17-48
(menu 35-46 are memory bank setup, please refer to page 89-91) are background operations, and they are
valid for all channels, the relevant setup will be saved until next change.
The operating methods are as follows:
key, the top left corner of LCD displays "
1.
Press
2.
Press /
Rotate the channel selector knob to choose desired setting.
3.
4.
Press key or
NOTE: When setting a CTCSS/DCS setting, Press
DCS press to switch between positive and inverse codes. When you edit a alpha-numeric name, press
to move to the next character, press
key to choose desired function.
key to conirm and exit.
" icon, then press
to select CTCSS, DCS or OFF. When you select
to move to the previous character.
key to enter function menu.
35