ADVANCED FUNCTION OPERATIONS
a. The caller can call different groups by sending different group call codes. When the receiving party
receives a valid ID code, wildcard characters can replace one or all of the characters and the receiving
party can: call all, group call, or selectively call. It is easy and lexible to utilize DTMF tones.
For example:
Group code: "C"
ID Code
If the calling party uses "C23" to call, Radio A and Radio B will receive the call.
If the calling party uses"CC5" to call, Radio C and Radio D will receive the call.
If the calling party uses "CCC" to call, All Radios will receive the call.
This transceiver is set with 16 groups of DTMF codes (you can individually set what the programmed
3.
"CALL" (PF1/PF2) does for each channel)
4.
Remote Stun, Remote Kill and Remote Wake.
Remote Stun: When the radio receives the DTMF that will "Remote Stun" it - it can no longer
a.
transmit and will receive only.
Remote Kill: When the radio receives the DTMF that will "Remote Kill" it - it can no longer transmit
b.
or receive.
Remote Wake: The only way to bring a radio out of `Remote Kill' or `Remote Stun' is by special
c.
dealer programming software --- or you can wake it by sending the `Remote Wake' DTMF tone.
The `Remote Wake' DTMF tone is activated by: sending the original DTMF `Kill/Stun' Code + the `#'
Tone.
80
Radio A
Radio B
123
223
Radio C
Radio D
235
355