Table of Contents
Advertisement
FUNCTION MENU SETUP
Busy Channel Lockout
BCLO function is used to prohibit transmitting on a busy channel, it can prevent disturbing other transceivers
operating on the same frequency. If you press PTT, the radio will beep as warning and go back to a receiving
state.
key, the top left corner of LCD displays "
1. Press
key enter into function menu.
2. Press
/
item, it shows "RPLOCK" on LCD.
3. Rotate channel selector knob to choose desired setup.
BUSY: Carrier wave lock, transmitting is prohibited when received matching
frequency and tone wave.
REPEAT: Signal lock, transmitting is prohibited when received matching carrier
(frequency) (CTCSS and DCS tones are ignored in this setting).
OFF: No BCLO function.
4. Press
key or
TX OFF
When this function is on, the [PTT] key is not allowed on the current channel.
Current channel of transceiver only works as a receiver and not a transmitter.
58
key to choose NO.15(OBLTR-8R)/NO.16(TERMN-8R) function
key to conirm and exit.
" icon, then press
Advertisement
Table of Contents
