Basic Operations; Switch On / Off Transceiver; Adjusting Volume; Channel Selection - AnyTone AT-D868 User Manual

BASIC OPERATIONS

Switch on / off Transceiver

Switch on Transceiver: Under power-off state, turn POWER / VOLUME clockwise till hearing
"Click" to switch on the transceiver. The transceiver will announce "Power on" and prompt current
channel number.
Switch off Transceiver: Under power-off state, turn POWER / VOLUME anticlockwise till hearing
"Click" to switch off the transceiver.

Adjusting Volume

Under power-on state, turn POWER / VOLUME switch to adjust the volume. Turn clockwise to
increase the volume, and anticlockwise to decrease the volume. If current communication channel is
with Analogue mode, you can press the programmed " Monitor" key to monitor current volume.
NOTE: It will be more accurately to adjust the desired volume when in communication status.
Channels Selection
Under the standby condition, turn channel selector knob to choose the desired channel, and the
transceiver will announce the channel number. Turn clockwise to increase the channel, anticlockwise
to decrease the channel.
NOTE: The transceiver will emit a voice prompt when current channel is blank.
13
Professional
FM Transceiver