Add A Channel; Delete A Channel - AnyTone THE OBLITERATOR OBLTR-8R User Manual

BASIC OPERATIONS

Add a channel

Under frequency mode (VFO), after you have set up your desired frequency and settings (read through
1.
the Function Menu Setup in order to understand how to set your desired frequency settings), Press the
key, the top left corner of LCD will display the "
manual channel programming mode, the channel number will begin lashing.
Rotate the channel knob until the Channel number displays the channel you would like to program(000-
2.
199).
key, the top left corner of LCD displays the "
3.
Press the
transceiver emits the conirmation beep. Your new channel has been programmed successfully.

Delete a channel

1.
While your radio is in standby, Press the
then press the
lashing.
Rotate the channel knob until the Channel number displays the channel you would like to remove(000-
2.
199).
key, the top left corner of LCD displays the "
3.
Press the
transceiver emits a conirmation beep. Your channel has been successfully deleted.
Note : This process can be used for FM radio channels as well.
20
key to enter the manual channel programming mode, the channel number will begin
" icon, then press the
" icon, and hold the
key, the top left corner of LCD will display the "
" icon, and hold the
key to enter the
key until the
" icon,
key until the