SHORTCUT OPERATIONS
set, they will also interchange.
2.
When "
R" icon disappears, it means that the channel is normal and is not reversed.
TX Power selection
When in standby, press
key to choose High/Middle/Low power for the current selected
then press
channel.
When LCD displays "
1.
When LCD displays NO icon, it means middle power has been chosen.
2.
When LCD displays "
3.
Talk Around function
When in standby, press
then press
, the current selected channel will enable talk around, repeat the
above operation to close talk around.
Enable talk around, current channel transmit at RX frequency, if CTCSS/
1.
TX=RX:
DCS signaling is set, it will interchange decoding CTCSS/DCS as encoding.
2.
OFF:
Close talk around.
DTMF code Transmit and Enquiry
key, the top left corner of LCD displays "
1.
Press
data and group number (total 16groups) of current group.
30
key, the top left corner of LCD displays "
L" icon, it means low power has been chosen.
H" icon,it means high power has been chosen.
key, the top left corner of LCD displays "
" icon,
" icon,
" icon, then press
key, LCD displays DTMF