Chapter 5
CLI – Layer 2
copy tftp SW_image
Use the copy tftp SW_image command to update the software image and the
device manager applications of a designated switch. To use this command, you
need to have an active TFTP server, and to create a file into which to download the
data. If CajunView is running, an additional tftp server is not required.
The syntax for this command is:
copy tftp SW_image <image-file> EW_archive <filename><ip>
<mod_num>
image-file
filename
ip
mod_num
Example:
P330-N# copy tftp SW_image c:\p330\p330web101 EW_archive
c:\p330\p330web201 192.168.49.10 5
130
Common name for the files that contain the Software
Image and Embedded Web archive (full path)
Embedded Web Manager image file name (full path)
The ip address of the TFTP server
Target switch number
Avaya P333T-PWR User's Guide