Table of Contents
Advertisement
Chapter 7
Cajun Campus CLI - Layer 3
ip proxy-arp Command
Use the ip proxy-arp command to enable proxy ARP on an interface. The no
form of this command disables proxy ARP on an interface.
The syntax for this command is:
[no] ip proxy-arp
Example:
To disable proxy ARP on interface marketing:
Router-N(config-if:marketing)# no ip proxy-arp
ip routing-mode Command
Use the ip routing-mode command to set the IP routing mode of the interface.
In RT-MGMT mode, the interface functions as a routing interface. In
RT_PRIMARY_MGMT mode, the interface function as both a routing interface and
the primary management interface. The IP address used in Avaya Multi-Service
Network Manager is the primary management interface IP address. Only one
interface can be in RT_PRIMARY_MGMT mode. If no interface is configured to
RT_PRIMARY_MGMT, the IP address used in Avaya Multi-Service Network
Manager is selected randomly.
The syntax for this command is:
[no] ip routing-mode <mode>
mode
Example:
Router-N>ip routing-mode RT_PRIMARY_MGMT
ip redirect Command
Use the ip redirect command to enable the sending of redirect messages on
the interface. The no form of this command disables the redirect messages. By
default, sending of redirect messages on the interface is enabled.
The syntax for this command is:
[no] ip redirect
Example:
Router-N>ip redirect
178
RT_MGMT or RT_PRIMARY_MGMT mode
Avaya P333R User's Guide
Advertisement
Table of Contents
