Ip Access-Default-Action Command - Avaya P333R User Manual

Chapter 7 Cajun Campus CLI - Layer 3

ip access-default-action Command

Use the ip access-default-action command to set the default action for a
specific policy list.
The syntax for this command is:
ip access-default-action <policy-list-number> <default-
action>
<policy-list-number>
<default-action>
Example:
Router-N>ip access-default-action 101 default-action-deny
ip access-list-name Command
Use the ip access-list-name command to set a name for a policy list.
The syntax for this command is:
ip access-list-name <policy-list-number> <name>
<policy-list-number>
<name>
Example:
Router-N>ip access-list-name 101 morning
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
210
integer (100..199)
default-action-deny|default-action-permit
integer (100..199)
list name
Avaya P333R User's Guide