Chapter 7
Cajun Campus CLI - Layer 3
User Mode
show ip route Command
Use the show ip route command to display information about the IP unicast
routing table.
The syntax for this command is:
show ip route [<ip-address>[ip-mask]]|static]
ip-address
ip-mask
static
Output Example:
Showing 2 rows
Network
-------------- -------------- ---------- -------------- ---- --- -------
0.0.0.0
192.168.54.0
160
The IP address of the routes
The ip mask of the routes.
IP Static route information.
Mask
Interface
0.0.0.0
mgmt
255.255.255.0 mgmt
Next-Hop
Cost TTL Source
192.168.54.1
1 n/a Stat-Lo
192.168.54.14
1 n/a Local
Avaya P333R User's Guide