Arp Timeout Command - Avaya P333R User Manual

arp timeout Command

Use the arp timeout command to configure the amount of time that an entry
remains in the ARP cache. To restore the default value, 14400, use the no form of
this command.
The syntax for this command is:
arp timeout <seconds>
The syntax for the no form of this command is:
no arp timeout
seconds
Example:
To set the arp timeout to one hour:
Router-N(configure)# arp timeout 3600
To restore the default arp timeout:
Router-N(configure)# no arp timeout
clear arp-cache Command
Use the clear arp-cache command to delete all dynamic entries from the ARP
cache and the IP route cache.
The syntax for this command is:
clear arp cache
Example:
Router-N(configure)# clear arp cache
Avaya P333R User's Guide
Chapter 7
The amount of time, in seconds, that an entry remains
in the arp cache.
Cajun Campus CLI - Layer 3
173