Show Interface - Avaya P333R User Manual

The syntax for this command is:
show logout
Output Example:
P330-N> show logout
CLI timeout is 10 minutes

show interface

Use the show interface command to display information on network
interfaces.
The syntax for this command is:
show interface
Output Example:
To display the interface:
P330-N> show interface
Interface Name
--------------
inband
ppp disable
show device-mode
Use the show device-mode command to show the P330-ML/P333R/P333R-LB
operating mode you are currently in. Possible modes are Router, or Layer2.
Note: This command is not supported by the P333T/P334T/P332MF/P333T-PWR
switches which do not have Router mode.
The syntax for this command is:
show device-mode
Avaya P333T-PWR User's Guide
VLAN IP address
---- ---------------
1 10.0.0.1
1 0.0.0.0
Chapter 5 CLI – Layer 2
Netmask
---------------
255.255.255.0
0.0.0.0
47