Chapter 7
Cajun Campus CLI - Layer 3
The syntax for this command is:
set qos dscp-name <dscp> <name>
dscp
name
Example:
Router-N(configure)# set qos dscp-name 10 "special"
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
set qos dscp-agg-index Command
Use the set qos dscp-agg-index command to configure the DSCP aggregate
index.
The syntax for this command is:
set qos dscp-agg-index <dscp> <agg-index>
dscp
agg-index
Example:
Router-N(configure)#set qos dscp-agg-index 5 3
set qos trust Command
Use the set qos trust command to configure which of the incoming packet's priority
parameters should be considered when determining the new assigned priority. You
can configure the P333R to trust either the cos (the 802.1p priority), the dscp (the
DSCP value), both, or neither. The default value is trust-dscp.
The syntax for this command is:
set qos trust {untrusted
cos-dscp}
Example:
Router-N(configure)# set qos trust cos-dscp
214
DSCP entry (0-63)
entry name
(0-63)
(0-63)
| trust-cos | trust-dscp | trust-
Avaya P333R User's Guide