Emerson FIELDVUE DVC6200f Instruction Manual page 292

DVC6200f Digital Valve Controller
Process Systems DeltaV System
Getting Started with DeltaV Host Systems
j
Appropriate Device Descriptions (DDs) installed. See the Device Description Compatibility table on
page 275. For DD installation information see Appendix E.
j
Digital valve controller correctly mounted on actuator. For mounting information see the
Installation section of this manual and the instructions included with the mounting kit.
j
Utilities connected. For information on making pneumatic and electrical connections, see the
Installation section of this manual. For information on applying power to the segment, see DeltaV
books online.
j
Instrument in standby. For information on placing the instrument in standby, see DeltaV books
online.
j
Perform the initial setup. See the Basic Setup section of this manual. If the valve is shipped from
the factory mounted on an actuator, perform basic setup only to verify setup is correct and valve
operation is satisfactory.
j
Device Commissioned. For information on commissioning a device, see DeltaV books online.
j
Additional configuration required, such as setting alarms, cutoffs, and other resource block and
transducer block parameters. See the Detailed Setup section of this manual.
j
Control strategy defined. For information on defining a control strategy, see DeltaV books online.
j
Associate I/O with device. See DeltaV books online.
j
Download device. See DeltaV books online.
F
280 November 2010