Initializing the SETUP Menu
Initialization of the SETUP menu resets the settings specified in the SETUP menu
to the default settings.
Initialize the menu by selecting INITIALIZE MENU in the hierarchy of "Options" in
the SETUP menu. Start the key operation from Step 1.
Operation Procedure
1
Display the SETUP menu.
SETUP
CONTROL MENU
2
Select INITIALIZE MENU.
INITIALIZE MENU→
3
Initialize the SETUP menu.
Confirm the message, then initialize the
4
SETUP menu.
IMPORTANT
If the message <INITIALIZE FAIL> appears when the initialization of the SETUP menu is
•
executed, the SETUP menu is not initialized.
Do not turn the printer OFF during the initialization. The printer memory may be
•
damaged.
Some settings do not become effective unless you cycle the power of the printer or
•
perform a hard reset.
→
OK?
Key Operation
Press the
(Settings) key.
The SETUP menu is displayed.
Press [ ] or [ ].
Press [OK].
A confirmation message is displayed.
Press [OK].
<INITIALIZING> is displayed during the
initialization. <DONE> is displayed after the
initialization is completed.
Initializing the SETUP Menu
5
5-17