Elcometer 500 User Manual page 3

CONTENTS (continued)
Section
11 Using the Coating Calibration Mould
12 Zeroing the Probe
12.1 Before You Start
12.2 To Zero the Probe
13 PIN Lock - Model T
14 Batching - Model T
15 Reviewing Batch Data - Model T
15.1 Batch Statistics
15.2 Batch Readings
15.3 Batch Graph
16 Menu Structure - Model B
17 Menu Structure - Model T
18 Downloading Data
18.1 Using ElcoMaster on a PC
18.2 Using ElcoMaster Mobile Apps - Model T
19 Upgrading Your Gauge
20 Spares & Accessories
20.1 Probes
20.2 Ultrasonic Couplant
20.3 Elcometer 500 Coating Calibration Mould (CCM)
21 Warranty Statement
22 Technical Specification
23 Legal Notices & Regulatory Information
Hg
Pb
For the avoidance of doubt, please refer to the original English language version.
Material Safety Data Sheets for the ultrasonic couplant and probe tip oil supplied by Elcometer, are available to
download via our website:
Elcometer Ultrasonic Couplant Material Safety Data Sheet:
www.elcometer.com/images/stories/MSDS/Elcometer_Ultrasonic_Couplant_Blue.pdf
Elcometer Ultrasonic Couplant (High Temperature) Material Safety Data Sheet:
www.elcometer.com/images/stories/MSDS/elcometer_ultrasonic_couplant_hi_temp.pdf
Elcometer Probe Tip Oil Material Safety Data Sheet:
www.elcometer.com/images/stories/MSDS/Elcometer_Probe_Tip_Oil.pdf
© Elcometer Limited 2016. All rights reserved. No part of this document may be reproduced, transmitted, transcribed,
stored (in a retrieval system or otherwise) or translated into any language, in any form or by any means (electronic,
mechanical, magnetic, optical, manual or otherwise) without the prior written permission of Elcometer Limited.
www.elcometer.com
®
®
R
Page
en-22
en-24
en-24
en-24
en-25
en-25
en-26
en-26
en-27
en-27
en-28
en-29
en-30
en-30
en-30
en-31
en-31
en-31
en-32
en-33
en-33
en-34
en-35
en-2