Elcometer 500 Coating Calibration Mould (Ccm) - Elcometer 500 User Manual

20 SPARES & ACCESSORIES (continued)

20.3 ELCOMETER 500 COATING CALIBRATION MOULD (CCM)

The Elcometer 500 Coating Calibration
Mould (CCM) is a steel mould with two
chambers - a sample chamber and overflow
chamber - which can be used to determine
the sound-velocity of coating materials for
calibration purposes. See Section 11 on
page en-22 for further information.
Description
Elcometer 500 Coating Calibration Mould (CCM)
21 WARRANTY STATEMENT
Gauges are supplied with a 12 month warranty against manufacturing
defects, excluding contamination and wear. The warranty can be
extended to two years within 60 days of purchase via
www.elcometer.com.
Probes are supplied with a 12 month warranty against manufacturing
defects, excluding contamination and wear.
en-33
R
Part Number
T50027567-1
www.elcometer.com