Use Lpr To Send A Print Job To The Océ Plotwave™ 300 - Oce PlotWave 300 User Manual

Use LPR to send a print job to the Océ PlotWave™ 300
Use LPR to send a print job to the Océ PlotWave™ 300
Introduction
The Océ PlotWave™ 300 supports printing through LPR.
If you send your print job through LPR the default Océ Express WebTools settings are
leading.
How to send a print job via LPR
Type the following line command after the DOS prompt: lpr -S <hostname or IP address>
-P <print queue name> <file name>.
Note:
You can use any name for <print queue name>, for example jobs.
158 Chapter 5 - Use the printing system